Basecoats

Download Product Data Sheets (PDS)

E-TUFF® 80

E-Tuff® 80 Is a single component, water catalyzed, fast setting, rapid curing, solvent free, TDI free, based on patented technology, high performance, and high solids polyurea/urethane polymer waterproof base membrane that can be applied to suitably for heavy-duty wearing surface applications on prepared interior or exterior, concrete, plywood and metal surfaces. Due to its fast gel time, E-Tuff® 80 is suitable for applications in temperatures as low as 20°F (-6.6 °C). It may be applied in a single or multiple applications. E-Tuff® 80 is also relatively insensitive to moisture and temperature allowing applications in various temperatures and humidity.

Read More..

E-Tuff® 100

E-Tuff® 100 is a solvent free, TDI free, single component, liquid applied, water catalyzed, polyurethane elastomeric waterproofing base membrane. Based on patent technology for use on concrete, metal and plywood surfaces and this can be applied in any thickness in a single coat application without gassing or blistering.

Read More..

P-TUFF® CLASSIC

P-Tuff® Classic is a non gassing, solvent free, single component, liquid applied, water catalyzed, polyurethane elastomeric waterproofing basecoat. The unique product allows the base membrane to be applied in one application up to 3” (7.6 cm) deep down to a feather edge and cures simultaneously throughout the coating in approximately 4 hours at 75ºF (24ºC) and 50% relative humidity. The basecoat may be used for very rough or highly textured surfaces and where sloping or pond filling is desired.

Read More..

B-TUFF® 302 / 302SC

B-Tuff® 302/302 SC is a single component, liquid applied, rapid curing, moisture cured, flexible, aromatic urethane basecoat that can be applied to suitably prepared concrete, plywood and metal surfaces. B-TUFF® 302 is 250 VOC and B-TUFF® 302SC is 100 VOC.

Read More..

B-TUFF® 302 NG

B-Tuff® 302 NG is a single component, liquid applied, rapid curing, moisture cured, flexible, aromatic urethane basecoat that can be applied to suitably prepared concrete, plywood and metal surfaces.

Read More.

B-TUFF® 306

B-Tuff® 306 is a two component, fast setting, rapid curing, solvent free, flexible, high performance, and high solids urethane basecoat that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, B- Tuff® 306 is suitable for applications in temperatures as low as 20°F (-6.7°C). It may be applied in a single or multiple applications. B-Tuff® 306 is also relatively insensitive to moisture and temperature allowing applications in various temperatures and humidity.

Read More..

B-TUFF® 308

B-TUFF® 308 is a two component, fast setting, rapid curing, solvent free, flexible, high performance, and high solids, urethane- elastomer base membrane that can be applied to prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, B-Tuff® 308 is suitable for applications in temperatures as low as 20°F (-6.7°C). It may be applied in a single or multiple applications. B-Tuff®308 is also relatively insensitive to moisture and temperature allowing applications in various temperatures and humidity.

Read More..

B-Tuff® 921

B-Tuff® 921 is a two component, fast curing, low odor, NSF approved, liquid applied, asphalt extended, aromatic polyurethane base membrane that adheres to most substrates, to form a waterproof membrane.

Read More..
© 2017 Poly-tuff Systems International