Caulking and Sealants

P-TUFF® SEALANT 50A (PTS 50A)

P-Tuff® Sealant 50A is two-component, 1:1 ratio, aromatic, rapid setting, self leveling, polyurea polyurethane, 50 shore A caulking compound for interior application. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT 80A (PTS 80A)

P-Tuff® Sealant 80A is a two component, aromatic, 1:1 ratio, rapid setting, self leveling, 100% solids polyurea caulking compound for interior and exterior horizontal applications. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT 8001 (PTS 8001)

P-Tuff® Sealant 8001 is a two component, aromatic, 1:1 ratio, rapid setting, thixotropic, 100% solids, polyurethane-polyurea caulking compound for bonding application. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT HA (PTS HA)

P-Tuff® P-Tuff® Sealant HA (Hand-Mix) is a two component, modified aliphatic, rapid setting, self leveling, 100% solids, polyurea-caulking compound. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT GG (PTS GG)

P-Tuff® Sealant GG is a two component, gun grade, 1:5 (1A:5B) ratio by volume, non sag, 100% solids, polyurethane-joint sealant. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT PG (PTS PG)

P-Tuff® Sealant PG is a self leveling, two component, 1:5 (1A:5B) ratio by volume, pourable grade, 100% solids polyurethane joint sealant. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/ codes at the place of installation of product.

Read More

P-TUFF® SEALANT JFR (PTS JFR)

P-Tuff® Sealant JFR is a two component, Jet Fuel/Chemical Resistant, 1:1 ratio, self leveling, polyurethane-caulking sealant. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT CR (PTS CR)

P-Tuff® Sealant CR is a two component, liquid applied, aromatic, polyurethane alloy specifically designed to repair concrete and masonry substrates. The new surface will protect concrete from weather, corrosion, erosion, freeze/thaw spalling, and chemical attacks. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT CR-SF (PTS CR-SF)

P-Tuff® Sealant CR-SF is a two component, low odor, liquid applied, polyurethane system designed to repair concrete and masonry substrates. The new surface will protect concrete from weather, corrosion, erosion, freeze/thaw spalling and chemical attack. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT E-101 (PTS E-101)

P-Tuff® Sealant E-101 is a high performance, interior or exterior joint sealant for use in both moving and non-moving joint applications. P-Tuff® Sealant E-101 provides a long lasting weather tight seal to a variety of building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT E-101 SL (PTS E-101 SL)

P-Tuff® Sealant E -101 SL is a high performance water-curable interior or exterior joint sealant for use in both moving and non-moving joint applications. P-Tuff® Sealant E -101 SL provides a long lasting, weather tight seal to a variety of common building substrates without the strenuous limitations of joint design by most manufacturers of construction sealants. The sealant may be applied to green or fully cured concrete. The tremendous adhesive strength and modulus of the sealant combined with the water curing method allows the sealant to be applied in depth up to 1-1 width to depth joint ratio and maintain a water-tight seal. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT E-102 (PTS E-102)

P-Tuff® Sealant E-102 is a single component, fast curing, high performance, low modulus, interior or exterior joint sealant for use in both moving and non-moving joint applications. P-Tuff® Sealant E-102 provides a long lasting, weather-tight seal to a variety of building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More

P-TUFF® SEALANT R12B (PTS R12B)

P-Tuff® Sealant R12B is a low modulus, fast, water curable, high performance interior or exterior, elastic, waterproofing-membrane adhesive and coating for roofing and waterproofing under Flexi-Ply™ and concealed waterproofing applications. PTS R12B provides a long lasting, weather tight seal to a variety of common building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Read More