CARBON FIBER REINFORCEMENT POLYMER (CFRP) SYSTEM

TuffArmor™ 300UD

TuffArmor™ 300UD is a 300 gram lightweight, high-tensile strength, stitch bonded, uni-directional carbon fabric that is produced from our continuous, tow-carbon fiber. It easily wets out with TuffSataturant™ saturate resin and can be installed using either the “wet lay-up” or “dry lay-up” technique. The light weight of the fabric allows dry application to TuffSataturant™ epoxy coated surfaces followed with a saturating coat of TuffSataturant™, and finally by TuffCover™ UV anti-carbonization and UV resistant topcoat significantly simplifying field application. PSI TuffArmor™ Systems are used to obtain a bonded FRP (fiber reinforced polymer) field laminate reinforcement system that will strengthen and enhance the performance of structural elements once installed. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffArmor™ 600UD

TuffArmor™ 600UD is a 600 gram lightweight, high-tensile strength, stitch bonded, uni-directional carbon fabric that is produced from our continuous, tow-carbon fiber. It easily wets out with TuffSaturant™ saturate resin and can be installed using either the “wet lay-up” or “dry lay-up” technique. The light weight of the fabric allows dry application to TuffSataturant™ epoxy coated surfaces followed with a saturating coat of TuffSaturant™, and finally by TuffCover™ UV anti-carbonization and UV resistant topcoat significantly simplifying field application. PSI TuffArmor™ Systems are used to obtain a bonded FRP (fiber reinforced polymer) field laminate reinforcement system that will strength-en and enhance the performance of structural elements once installed. Please use the correct product grade that complies with VOC regu-lations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffCarbon Plate™

TuffCarbon Plate™ is a range of pultruded carbon-fiber-reinforced polymer (CFRP) plates designed for the external structural strengthening of existing concrete, wood, masonry and steel members. TuffCarbon Plate™ is externally bonded onto the surface of the substrate to strengthen and stiffen existing structures, using an epoxy resin specifically designed for the application. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffCover™ UV

TuffCover™ UV forms a weatherproof barrier against nature’s harsh extremes. Steel and concrete structures expand and contract in re-sponse to the weather and structural stresses. Unlike typical exterior coating, this coating fills and bridges hairline cracks, helping to prevent damaging water penetration. It passes Federal Specification TT-C-555B, sec. 3.3.3, withstanding 98 mph wind-driven rain. This premium quality coating provides UV protection as well as aesthetic benefits. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPaste™

TuffPaste™ is a two-component, 1:1, non-sag, high modulus, high strength, 100% solids, moisture tolerant, solvent free, structural epoxy adhesive developed specifically for use as a matrix with the TuffArmor™ Structural Strengthening System. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffSaturant™

TuffSaturant™ is a two-component, hi-modulus, low viscosity, high strength, 100% solids, structural-epoxy adhesive for use with PSI Struc-tural Strengthening Systems. TuffSaturant™ provides a long working time for application with no offensive odor. TuffSaturant™ is a high modulus material which gives optimum properties as a matrix for the TuffArmor™ System. Please use the right product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More