EPOXIES

Enviro-Grip®

Enviro-Grip® is a low viscosity, two component, solvent free, moisture tolerant, high gloss, multipurpose, epoxy coating with high-chem-ical-re-sistant properties. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffCRT™ II

TuffCRT™ II is a unique three component, rapid curing, non-shrink, hybridized, epoxy-urethane based elastomeric concrete. It cures to a dense, semi-flexible, weather, abrasion and impact resistant polymer mortar for the construction or repair of expansion and construction joints on bridges and parking decks. The combined A & B polymers when mixed with its Side C, TuffCRT™ II blended aggregate forms a mortar with excellent long-term installation properties for joint, nosing repair, or deep patches.

Read More

TuffDeck™ 7097

TuffDeck™ 7097 is a 1:1 ratio, 100% solids, low modulus, low viscosity, moisture tolerant, rapid setting, low viscosity, epoxy binder and adhesive. It is formulated as a single and multi-layer, hi–friction, skid-resistant overlay providing minimal closure times. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffDeck™ FC

TuffDeck™ FC is a 1:1 ratio, 100% solids, low modulus, low viscosity, moisture tolerant, rapid setting, low viscosity epoxy binder and adhe-sive. It is formulated as a Single and Multi-layer Hi–Friction Skid Resistant Overlay providing minimal closure times. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 2

TuffPoxy™ 2 is an AASHTO M237 certified two-part epoxy, standard set adhesive system. It was specifically designed for the bonding of traffic markers, delineators, safety posts. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 3FS

TuffPoxy™ 3FS is a two component, high strength moisture insensitive, high modulus, multi-purpose, non-sag, structural epoxy system designed to offer exceptional strength in anchoring, pasting, and bonding applications. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 4

TuffPoxy™ 4 is a two-component 100% solids epoxy designed as a very low viscosity, high strength sealer for hairline cracks in concrete substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 5

TuffPoxy™ 5 is a two-component, multi-purpose, high modulus, moisture tolerant, epoxy-bonding adhesive that meets the requirements of ASTM C-881, Type I, II, IV & V grade 2, classes B & C. TuffPoxy™ 5 is 100% solids, solvent-free, medium viscosity bonder. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 8

TuffPoxy™ 8 a two-component, 100% solids, moisture-insensitive, medium viscosity, high strength, multipurpose liquid epoxy adhesive. With aggregate or other mineral fillers, it can be used as a mortar or grout to resurface or patch damaged concrete slabs and walls. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 9

TuffPoxy™ 9 is a plural component, unique formula developed for structural concrete repair by crack injection, gravity feed or patching. It can be used as a liquid binder for sand, aggregate or any other mineral filler to patch or resurface damaged concrete slabs. This material may be used to repair masonry, wood, and other rigid construction materials. TuffPoxy™ 9 is 100% solids, VOC free and Butyl Glycidyl Ether (BGE) free. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ 10

TuffPoxy™ 10 is a high solids, two-part epoxy coating system. It is designed as a waterproofing sealant and protective coat for concrete surfaces. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More