×

Carbon Fiber Reinforcement Polymer (CFRP) Systems

B-Tuff® Wrap 300 UD

B-Tuff® Wrap 300 UD is a 300 gram lightweight, high-tensile strength, stitch bonded, uni-directional carbon fabric that is produced from our continuous, low-carbon fiber. It easily wets out with E-Tuff® Saturant saturate resin and can be installed using either the “wet lay-up” or “dry lay-up” technique.

Download Tech Sheet

B-Tuff® Wrap 600 UD

B-Tuff® Wrap 600 UD is a 600 gram lightweight, high-tensile strength, stitch bonded, uni-directional carbon fabric that is produced from our continuous, low-carbon fiber. It easily wets out with E-Tuff® Saturant saturate resin and can be installed using either the “wet lay-up” or “dry lay-up” technique.

Download Tech Sheet

B-Tuff® Plate

B-Tuff® Plate is a range of pultruded carbon-fiber-reinforced polymer (CFRP) plates designed for the external structural strengthening of existing concrete, wood, masonry and steel members. B-Tuf f® Plate is externally bonded onto the surface of the substrate to strengthen and stiffen existing structures, using an epoxy resin specifically designed for the application.

Download Tech Sheet

B-Tuff® Top Coat UV

B-Tuff® Top Coat UV forms a weatherproof barrier against nature’s harsh extremes. Steel and concrete structures expand and contract in response to the weather and structural stresses. Unlike typical exterior coating, this coating fills and bridges hairline cracks, helping to prevent damaging water penetration. It passes Federal Specification TT-C-555B, sec. 3.3.3, withstanding 98 mph wind-driven rain.

Download Tech Sheet

E-Tuff® Paste

E-Tuff® Paste is a two component, high strength moisture insensitive, high modulus, multi-purpose, non-sag, structural epoxy system designed to offer exceptional strength in anchoring, pasting, and bonding applications. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

E-Tuff® Saturant

E-Tuff® Saturant is a two-component, high modulus, low viscosity, high strength, 100% solids, structural-epoxy adhesive for use with PSI Structural Strengthening Systems. E-Tuff® Saturant provides a long working time for application with no offensive odor. E-Tuff® Saturant is a high modulus material which gives optimum properties as a matrix for the Tuf f Wrap™ System.

Download Tech Sheet