×

Joint Sealants

P-Tuff® SL

P-Tuff® SL1 is a high-performance interior or exterior joint sealant for use in both moving and non-moving joint applications. P-Tuff® SL1provides a long-lasting weather-tight seal to a variety of building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

P-Tuff® NS 1

P-Tuff® NS1 is a high-performance interior or exterior joint sealant for use in both moving and non-moving joint applications. P-Tuff® NS1provides a long lasting weather tight seal to a variety of building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

P-Tuff® PF-UV Joint

P-Tuff® Joint™ PF-UV is a pre-formed, closed cell, low density, cross linked, EVA/PE (Ethyl Vinyl Acetate-Polyethylene) foam joint seal. It is an expansion joint seal for use in bridge decks, commercial buildings, parking decks, water treatment facilities, and other industrial ap-plications. P-Tuff® Joint™ PF-UV contains a HALS (Hindered Amine Light Stabilizer - UV inhibitor) which provides increased performance to Ultra Violet light than other foam products containing carbon black.

Download Tech Sheet

P-Tuff® AC Sealant

P-Tuff® AC Sealant is a high performance, self-leveling, exterior joint sealant for use in asphalt or concrete moving and non-moving joints or crack applications in severe roadway exposure. P-Tuff® AC Sealant provides a long lasting flexible weather tight seal and may be applied to clean damp surfaces without risk of gassing or bubbling. It is a self-leveling, self-curing, non-priming sealant. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

E-Tuff® Loop Sealant

 

Download Tech Sheet

E-Tuff® Joint Fill

E-Tuff® Joint Fill is a load bearing joint filler designed to protect concrete commercial and industrial floors subjected to hard wheeled traffic.

Download Tech Sheet

P-Tuff® Joint Fill

P-Tuff® Joint Fill is two component, 100 % solids polyurea, UV resistant, rapid setting, self leveling formulation designed for filling moderate-duty saw cut control and construction joints in commercial and industrial concrete floors. VOC compliant in all States and Provinces in North America.

Download Tech Sheet