×

Roadway & Concrete Repair

B-Tuff® Patch DOT

B-Tuff® Patch DOT is a single component, polymer modified, fiber reinforced, rapid-setting-concrete mortar with corrosion inhibitor Port-land-cement based, high quality, repair material. This unique formulation develops high early strength with zero shrinkage and excellent durability.

Download Tech Sheet

B-Tuff® Patch VOH

B-Tuff® Patch VOH is a single component, fiber reinforced, Portland-Cement based, polymer-modified material designed to repair and rehabilitate vertical and overhead concrete and masonry surfaces without the need for costly form work.

Download Tech Sheet

B-Tuff® Grout Premium

B-Tuff® Grout PM Pointing Mortar is for pavers, adhered stone, thin brick, and manufactured masonry veneers. It is factory prepared and designed to be mixed with water. Formulated from a blend of high strength Portland cement, graded aggregates, and color-fast pigments.

Download Tech Sheet

B-Tuff® Grout NS

B-Tuff® Grout NS is a non-shrink, non-corrosive, non-metallic, multipurpose, cement based, flowable grout. TuffGroutâ„¢ NS is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion.

Download Tech Sheet

B-Tuff® Coat Plus

 

Download Tech Sheet

E-Tuff® ENS

E-Tuff® ENS is an epoxy binder and pre-engineered aggregate system. The epoxy is a semi-rigid 1:1 ratio, two component, 100 % solids, low modulus, moisture tolerant, rapid setting, abrasion, chemical and impact resistant epoxy binder. Mixed with pre-engineered aggregate, the blended components develop an epoxy nosing system, repair mortar to patch and protect new or repair existing expansion and con-struction joints; headers on bridges, elevated highways and parking decks.

Download Tech Sheet

E-Tuff® Mortar

E-Tuff® Mortar a two-component, 100% solids, moisture-insensitive, medium viscosity, high strength, multipurpose liquid epoxy adhe-sive. With aggregate or other mineral fillers, it can be used as a mortar or grout to resurface or patch damaged concrete slabs and walls. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

E-Tuff® Deck II

E-Tuff® Deck II epoxy patching is a three-component, 100% solids, multi-purpose, high strength epoxy patching mortar. The system com-bines a high-quality epoxy resin and curing agent with a pre-engineered blend of graded aggregates. E-Tuff® Deck II is specifically engi-neered to provide superior patching while demonstrating similar physical characteristics to the concrete substrate. VOC compliant in all states and provinces in North America.

Download Tech Sheet

P-Tuff® HM

P-Tuff® HM is a unique, three component, rapid curing, non-shrink, hybridized, polymer based, elastomeric concrete that cures to a dense, semi-flexible, weather, abrasion and impact resistant polymer mortar for the construction or repair of expansion and construction joints on bridge and parking decks. The combined Side-A and Side-B of P-Tuff® HM polymers, when mixed with its Side-C (blended aggregate), forms a mortar with excellent long-term installation properties for joint nosing repairs, or deep patches.

Download Tech Sheet

P-Tuff® SP

P-Tuff® SP is a three component, rapid curing, polyurethane based concrete repair mortar. The systems combine a high-quality polyurethane resin binder with a pre-engineered blend of proprietary graded aggregates. Formulated to create a long lasting, resilient, dense, semi-flexible, weather, abrasion and impact resistant concrete repair. Repair roadways, bridges, elevated highways, airport runways and aprons, parking decks and other concrete elements. VOC compliant in all States and Providences in North America.

Download Tech Sheet