×

Surface Treatments & Coatings

B-Tuff® RustCheck

B-Tuff® Rust Checkis a water based, rust converter combined with a non-pigmented, high quality metal primer. The converter segments turn rust into a barrier layer of black non-rusting magnetite. The metal primer acts as a bonding agent for polymer concrete, cementitious materials, oil and water-based epoxy, enamel, acrylic, polyurethane, and urethane coatings. Please use the correct product grade that com-plies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

B-Tuff® Aid

B-Tuff® Aid is designed to be used as a finishing aid and evaporation retarder on new concrete surfaces of all types. When sprayed over fresh concrete, B-Tuff® Aid forms a thin, continuous film which greatly assists the finishing and tooling processes while preventing rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application.B-Tuff® Aid is espe-cially effective when concreting operations must be performed in direct sun, high wind and temperatures or low relative humidity.

Download Tech Sheet

B-Tuff® Etch

B-Tuff® Etch is a non-fuming, VOC free, non-hazardous, non-corrosive, biodegradable concentrate, concrete etch and cleaning solution. It is a great alternative to muriatic or phosphoric acids used to etch cementitious surfaces to achieve optimum bonding for stains, coatings, and sealers. Unlike the standard acids available, B-Tuff® Etch will not burn skin or corrode metals or require neutralizing.

Download Tech Sheet

B-Tuff® Shield 40

B-Tuff® Shield 40 is a 40% solids, solvent based, silane sealer. This clear, penetrating, breathable, water repellent is designed for use interior and exterior above-grade concrete or masonry surfaces. B-Tuff® Shield 40 penetrates the surface and bonds directly with the substrate, which result in a surface that is highly resistant to both moisture and salt. B-Tuff® Shield 40 helps protect against the corrosive effect of de-icing salts, moisture, and weathering to prevent spalling and deterioration of concrete structures.

Download Tech Sheet

B-Tuff® Extract

B-Tuff® Extract is a single component, polymer modified, reactive-osmotic reagent that seals, densifies, hardens, reduces vapor drive and preserves most concrete substrates when used as part of a Poly-Tuff System. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product

Download Tech Sheet

B-Tuff® Glaze 25

P-Tuff® Glaze 25 is a VOC compliant acrylic nonyellowing polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. P-Tuff® Glaze 25 is formulated to provide maximum color stability in a high gloss finish. P-Tuff® Glaze 25 is stable under Ultra-Violet light and is suitable for both exterior and interior use on industrial, com-mercial and residential applications.

Download Tech Sheet

B-Tuff® Lith

B-Tuff® Lith is the premium hardener, densifier, and sealer for concrete surfaces. This penetrating lithium silicate treatment reacts with the concrete to produce insoluble, calcium-silicate hydrate within the concrete pores. B-Tuff® Lith is the best choice for hardening, sealing, densifying freshly placed concrete and for final application to diamond polished concrete, including dyed, stained or colored diamond polished concrete.

Download Tech Sheet