SURFACE TREATMENTS / COATINGS

RustCheck™

RustCheck™ is a water based, rust converter combined with a non-pigmented, high quality latex metal primer. The converter segments turn rust into a barrier layer of black non-rusting magnetite. The metal primer acts as a bonding agent for polymer concrete, cementitious mate-rials, oil and water-based epoxy, enamel, acrylic, polyurethane, and urethane coatings. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffAid™

TuffAid™ is designed to be used as a finishing aid and evaporation retarder on new concrete surfaces of all types. When sprayed over fresh concrete, TuffAid™ forms a thin, continuous film which greatly assists the finishing and tooling processes while preventing rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application. TuffAid™ is especially effective when concreting operations must be performed in direct sun, high wind and temperatures or low relative humidity.

Read More

TuffCover™ Plus

TuffCover™ Plus is a polymer modified, cement based, waterproofing coating designed to provide water-resistant concrete and masonry substrates. TuffCover™ Plus is designed to waterproof the exterior surface of above and below grade concrete and masonry which resists both positive and negative hydrostatic pressure. When properly applied, TuffCover™ Plus closes the internal voids in the substrate, filling and sealing the pores, while remaining breathable. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPoxy™ BAC

TuffPoxy™ BAC is a unique, three component, extended-pot life, moisture-insensitive mixture combining the benefits of a 100% solids epoxy system, a corrosion inhibitor, and specially-graded aggregates with cement. TuffPoxy™ BAC may be used neat as a bonding agent or mixed with Side C to produce a thick protective coating on rebar that prevents corrosion. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPrep™

TuffPrep™ is a non-fuming, VOC free, non-hazardous, non-corrosive, biodegradable concentrate, concrete etch and cleaning solution. It is a great alternative to muriatic or phosphoric acids used to etch cementitious surfaces to achieve optimum bonding for stains, coatings, and sealers. Unlike the standard acids available, TuffPrep™ will not burn skin or corrode metals or require neutralizing. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffProtect™ 40

TuffProtect™ 40 is a 40% solids, solvent based, silane sealer. This clear, penetrating, breathable, water repellent is designed for use on inte-rior and exterior above-grade concrete or masonry surfaces. TuffProtect™ 40 penetrates the surface and bonds directly with the substrate, which results in a surface that is highly resistant to both moisture and salt. TuffProtect™ 40 helps protect against the corrosive effects of de-icing salts, moisture, and weathering to prevent spalling and deterioration of concrete structures.

Read More

TuffRelease™ Concentrate

TuffRelease™ Concentrate, once diluted, creates a reactive, water-based, release agent for all types of concrete forms. Forms treated with TuffRelease™ Concentrate easily minimizes the number of bug holes. TuffRelease™ Concentrate will not damage styrene bead or form liners. It leaves a coating on steel forms that inhibits rust. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More