URETHANES

TuffCRT™ HM

TuffCRT™ HM is a unique, three component, rapid curing, non-shrink, hybridized, polymer based, elastomeric concrete that cures to a dense, semi-flexible, weather, abrasion and impact resistant polymer mortar for the construction or repair of expansion and construction joints on bridge and parking decks. The combined Side A and Side B TuffCRT™ HM polymers, when mixed with its Part C (blended aggregate), forms a mortar with excellent long-term installation properties for joint nosing repairs, or deep patches. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffDeck™ BDM

TuffDeck™ BDM Spray-on, seamless, waterproofing membrane for Highway and Railroad Bridge Decks is a fast setting, seamless and joint-free coating system made from a rapid-curing, 100% solids, flexible, aromatic, two component, spray polyurea which can be applied to suitably prepared concrete and metal surfaces. It’s extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures. It also coats carbon or mild steel metals without primer. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffMend™ AP

TuffMend™ AP is a unique three component rapid curing, non shrink, hybridized, polymer-based elastomeric mortar that cures to a dense, semi flexible, weather-, abrasion-, shrink- and impact-resistant polymer mortar for the repair of spalls on roadways, bridges and parking lots. The combined Side A and Side B TuffMend™ AP polymers when mixed with its Side C, (polymerized treated black aggregate), forms a mortar with excellent long-term properties for all types of repairs or deep patches. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffMend™ APO

TuffMend™ APO is a unique, three component, rapid curing, non shrink, hybridized, polymer based, elastomeric mortar that cures to a dense, semi flexible, weather-, abrasion-, shrink- and impact-resistant polymer mortar for the repair of spalls on roadways, bridges and parking lots. The combined Side A and Side B TuffMend™ APO polymers when mixed with its Side C, (polymerized treated black aggregate), forms a mortar with excellent long-term properties for all types of repairs or deep patches. Please use the correct product grade that com-plies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product

Read More

TuffMend™ SP & MM

TuffMend™ SP & MM is a unique three component, rapid curing, non shrink, hybridized, polymer-based elastomeric concrete that cures to a dense, semi-flexible, weather-, abrasion- and impact-resistant polymer mortar for the repair of spalls on roadways, bridges, and parking decks. The combined TuffMend™ SP Side A & B polymers, when mixed with its Side C (Blended Aggregate) forms a mortar with excellent long-term installation properties for all types of repairs, or deep patches. TuffMend™ MM is the Machine Mix version with the exact same properties. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffPlug™

TuffPlug™ is a 1:1 ratio, 100% solids, low modulus, low viscosity, flexible, polymer-joint system designed to accommodate minimum structure movement (± 1”, 2.54 cm) while providing a smooth, flexible, watertight seal. TuffPlug™ combines the use of a traffic-bearing plate or membrane with a special aggregate reinforced rapid setting polymers, offering minimal closure times. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffSealant™ HS

TuffSealant™ HS is a 1:1 ratio, 100% solids, low modulus, low viscosity, flexible, polymer-joint system designed to accommodate minimum structure movement (±1”or 2.54 cm) while providing a smooth, flexible, watertight seal. TuffSealant™ HS combines the use of a traffic-bearing plate or membrane with special aggregate-reinforced-rapid-setting polymers, offering minimal closure times. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More

TuffStrength™

TuffStrength™ is a two component, low viscosity, waterproof, urethane consisting of equal parts of Side A, a diphenylmethane di-isocynate urethane pre-polymer and of Side B, a polyether diols triols. TuffStrength™ is 100% solids and contains no VOCs. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Read More