Epoxy9™ is a unique formula developed for structural concrete repair by crack injection, gravity feed or patching. It can be used as a liquid binder for sand, aggregate or any other mineral filler to patch or resurface damaged concrete slabs. This material may be used to repair masonry, wood, and other rigid construction materials. Epoxy9™ is 100% solids, VOC free and Butyl Glycidyl Ether (BGE) free.
Read MoreRustCheck™ is a water based rust converter combined with a non pigmented high quality latex metal primer. The converter segments turn rust into a barrier layer of black non rusting magnetite. The metal primer acts as a bonding agent for polymer concrete, cementitious materials, oil and water based epoxy, enamel, acrylic, polyurethane, and urethane coatings.
Read MoreTuffAid™ is designed to be used as a finishing aid and evaporation retarder on new concrete surfaces of all types. When sprayed over fresh concrete, TuffAid™ forms a thin, continuous film which greatly assists the finishing and tooling processes while preventing rapid moisture loss from the concrete surface. It is easy to use requiring only the addition of water before spray application.
Read MoreTuffCoat™ UV forms a weatherproof barrier against nature’s harsh extremes. Steel and concrete structures expand and contract in response to the weather and structural stresses. Unlike typical exterior coating, this coating fills and bridges hairline cracks, helping to prevent damaging water penetration. It passes Federal Specification TT-C-555B, sec. 3.3.3, withstanding 98 mph wind-driven rain.
Read MoreTuffCrete™ II is a unique three-component rapid curing, non-shrink, hybridized epoxy urethane based elastomeric concrete that cures to a dense, semi-flexible, weather, abrasion and impact resistant polymer mortar for the construction or repair of expansion and construction joints on bridge and parking decks.
Read MoreTuffDeck™ 7097 is a 1:1 ratio, 100% solids, low modulus, low viscosity, moisture tolerant, rapid setting, low viscosity epoxy binder and adhesive formulated as a Single and Multi-layer Hi–Friction Skid Resistant Overlay providing minimal closure times.
Read MoreTuffDeck™ FC is a 1:1 ratio, 100% solids, low modulus, low viscosity, moisture tolerant, rapid setting, low viscosity epoxy binder and adhesive formulated as a Single and Multi-layer Hi–Friction Skid Resistant Overlay providing minimal closure times.
Read MoreTuffGlass™ 27 is a custom weave unidirectional glass fiber fabric with fiber oriented in the 0° direction and additional yellow glass cross fibers at the 90°. The TuffGlass™ 27 system is field laminated using environmentally friendly, TuffSat™ saturate, a two-part, 100% solids and high strength structural adhesives to form a glass fiber reinforced polymer (GFRP) system used to reinforce structural elements.
Read MoreTuffPatse™ is a two-component, 1:1, non-sag, high modulus, high strength, 100% solids, moisture-tolerant, solvent free, strutural epoxy adhesive developed specifically for use as a matrix with the TuffWrap Structural Strengthening System.
Read MoreTuffPatch™ VOH is a single component, fiber reinforced, Portland Cement based, polymer modified material designed to repair and rehabilitate vertical and overhead concrete and masonry surfaces without the need for costly form work. The fast setting, low shrinkage, non-sag, and high strength of TuffPatch™ VOH allow it to be placed and sculpted to final shape in a single application up to 2" in thickness.
Read MoreTuffPlug™ is a 1:1 ratio, 100% solids, low-modulus, rapid-setting, low-viscosity binder and aggregate joint system providing minimal closure times. TuffPlug™ provides a smooth, flexible, watertight bridge joint, which will allow for ± 1” joint movement.
Read MoreTuffPoxy™ 3 is a two-component epoxy moisture insensitive, high modulus, structural epoxy bonding gel. TuffPoxy™ 3 is 100% solids, solvent free, low odor, high strength, and non-sag. VOC Content=0 grams/liter. Epoxy 3 meets ASTM C-881, Type I, II, IV, and V Grade 3, Class C.
Read MoreTuffPoxy™ 3FS is a 2-component, high strength moisture insensitive, high modulus, multi-purpose, non-sag, structural epoxy system designed to offer exceptional strength in anchoring, pasting, and bonding applications.
Read MoreTuffPoxy™ 4 is a two-component 100% solids epoxy designed as a very low viscosity, high strength sealer for hairline cracks in concrete substrates.
Read MoreTuffPrep™ is a non-fuming, VOC free, non-hazardous, non-corrosive, biodegradable concentrate concrete etch and cleaning solution. It is a great alternative to muriatic or phosphoric acids used to etch cementitious surfaces to achieve optimum bonding for stains, coatings, and sealers. Unlike the standard acids available, TuffPrep™ will not burn skin or corrode metals or require neutralizing.
Read MoreTuffSat™ is a two-component, Lo-modulus, low viscosity, high strength, 100% solids structural epoxy adhesive for use with PSI Structural Strengthening Systems. TuffSat™ provides a long working time for application with no offensive odor. TuffSat™ is a high elongation material which gives optimum properties as a matrix for the TuffWrap™ System.
Read More